How to Install the Embedded Ceiling Lamp in the Kitchen?

In modern kitchen decoration, many design schemes use embedded lamps and lanterns. Compared with ordinary lamps and lanterns, embedded kitchen lamps are beautiful and space-saving, making the kitchen look more concise and bright. This article will introduce how to install the embedded kitchen lamp.

The so-called embedded ceiling lamp refers to the lighting fixtures embedded in the ceiling for ceiling installation. After the installation of such lighting fixtures, the bottom surface of the entire lamp is as flat as the ceiling, so it is very beautiful and fashionable.

Installation of the embedded kitchen lamp

Turn off the electric switch first, and then test whether there is electricity in the power grid wire with a pencil to prevent electric shock and other hazards. Use the hole opener to make holes on the ceiling according to the hole size of the lamp, connect the electric wire of the lamp with the power grid wire of the home, and wrap the interface with electrical tape. Press the two torsion springs of the lamp up to be vertical to horizontal by hand, and keep pressing the lamp torsion spring until the lamp and torsion spring are plugged into the ceiling hole. The lamp and torsion spring have been inserted into the hole to press the outer ring of the ceiling lamp and adjust it to the proper position. After the switch is turned off, use an electric pen to test whether there is electricity in the power grid wires to prevent electric shock.

Precautions for installation of embedded ceiling lamp

As mentioned above, although the installation of an embedded ceiling lamp is relatively simple, some details still need to be paid attention to during the installation process to ensure the long service life of the lamp. The installation precautions of embedded ceiling lamps include:

1. Ceiling lamp shall not be directly installed on combustible objects:

To look beautiful, some families use painted plywood to line the back of the ceiling lamp. This is very dangerous, and thermal insulation measures must be taken. If the high-temperature part of the lamp surface is close to combustibles, thermal insulation or heat dissipation measures should also be taken.

2. Wrap the connecting wire:

To ensure the safety of the lamps, the two wire ends connected to the power incoming line of the ceiling lamp should have good electrical contact. They should also be wrapped with black tape and kept at a certain distance. If possible, the two wire ends should not be placed under the same metal sheet to avoid short circuits and danger.

3. Before installation of the ceiling lamp, check:

Generally, before the installation of the ceiling lamp, it is necessary to conduct a detailed inspection, mainly to check the cross-section of the conductor core leading to each lamp. The copper core flexible wire shall not be less than 0.75 mm, otherwise, the lead must be replaced; The connection between the wire and the lamp holder, and the connection of the parallel wire between the lamp holders shall be firm, and the electrical contact shall be good, to avoid the danger of sparks between the wire and the terminal due to poor contact.

We are the leading recessed rectangular ceiling lights Manufacturer, any interests,  plz feel free to contact us.